Thermal stability of nanometric TiC-carbon composites: effects of carbon allotropes and Zr milling impurities

In the ISOL (Isotope Separator OnLine) method a target at high temperatures (up to 2300?°C), is bombarded with high energy protons in order to produce isotopes through nuclear reactions which are simultaneously extracted from the target, ionized and delivered to physics experiments. Due to the enhanced isotope release properties of nanosized porous materials, titanium carbide-carbon porous nanocomposites have been developed at CERN and tested up to 1500?°C. In the interest of the ISOL application, in this study we extended the range of temperatures up to 1800?°C, to test the sintering hindering capabilities of different carbon allotropes. Carbon black was the most effective with the smallest TiC crystallite size: <80?nm at 1800?°C. Additionally, using thermodynamic modelling, ex-situ X-ray powder diffraction and in-situ gas phase analysis, we show that there are interesting additional phase and lattice parameter changes due to the ZrO₂ impurities from the attrition milling.     

Microwave-assisted solution synthesis,microwave sintering and magnetic properties of cobalt ferrite

A simple, soft, and fast microwave-assisted hydrothermal method was used for the preparation of nanocrystalline cobalt ferrite powders from commercially-available Fe(NO₃)₃?9H₂O, Co(NO₃)₂?6H₂O, ammonium hydroxide, and tetrapropylammonium hydroxide (TPAH). The synthesis was conducted in a sealed-vessel microwave reactor specifically designed for synthetic applications, and the resulting products were characterized by XRD, FE-SEM, TEM, and HR-TEM. After a systematic study of the influence of the microwave variables (temperature, reaction time and nature of the bases), highly crystalline CoFe₂O₄ nanoparticles with a high uniformity in morphology and size, were directly obtained by heating at 130?°C for 20?min using the base TPAH. Dense ceramics of cobalt ferrite were prepared by non-conventional, microwave sintering of synthesized nanopowders at temperatures of 850–900?°C. The magnetic properties of both the nanopowders and the sintered specimens were determined in order to establish their feasibility as a permanent magnet.     

山东省平阴县阎庄铁矿床地质特征及成因分析

阎庄铁矿位于汶上—东平成矿带北侧，为探讨该矿床成矿标志，通过研究矿床地质特征，分析其成因并总结找矿标志，对区内找矿工作具有借鉴价值。矿体赋存于山草峪组中，其形态受基底背斜控制，呈似层状产出，岩浆岩对矿体的连续性起破坏作用。矿床成因为与新太古代火山活动及区域变质作用有关的沉积变质型铁矿床，泰山岩群变质岩系与磁异常是该类型矿床的找矿标志。     

Solution combustion synthesis of cerium oxide nanoparticles as corrosion inhibitor

In this study, combustion synthesis of cerium oxide nanoparticles was reported using cerium nitrate hexahydrate as starting material as well as urea, glycine, glucose, and citric acid as fuels. The influence of fuel type on structure, microstructure, band gap, and corrosion inhibition was investigated. X-ray diffraction (XRD) patterns and scanning electron microscopy micrographs showed that CeO₂ nanoparticles with different morphologies were obtained depending on the fuel type. Microstructural changes from unreacted gel to sponge-like morphologies were resulted by varying the fuel type from urea, glycine, and glucose to citric acid. In addition to Ce–O bonds, Fourier transform infrared analysis showed carbon bonds of carbonaceous compositions from incomplete combustion which were declined during combustion reaction. Furthermore, corrosion analyses showed that samples synthesized using urea fuel released the most Ce⁺⁴ ions and could have better protection than other samples.     

非高斯噪声激励下非线性漂移Fokker-Planck方程的非稳态解及其应用

非高斯噪声广泛存在于各种非线性系统，对非高斯噪声所驱动系统的非稳态演化行为进行研究可以更为深入的了解其内在的演化机理．本文对非高斯噪声和高斯白噪声共同驱动的非线性动力学系统的非稳态演化问题进行研究．首先应用格林函数的 $\Omega$ 展开理论在初始区域对非线性动力学系统进行线性化，然后结合本征值和本征矢理论推导出了该系统 Fokker-Planck 方程的近似非稳态解的表达式，最后以 Logistic 系统模型为例分析了非高斯噪声强度，关联时间及非高斯噪声偏离参数对非稳态解以及一阶矩的影响．研究结果表明，用 Logistic 模型描述产品产量增长时，其非稳态解可更好地反映产品产量在不稳定点附近的演化行为．     

一类两性分枝过程条件均值增长率的极限性质

本文主要研究随机环境中配对依赖人口数两性 Galton-Watson 分枝过程的条件均值增长率的极限性质．利用上可加函数的性质，得到配对单元平均增长率的极限性质和该过程条件均值的上界和下界．文中给出了关于过程条件均值增长率的两个序列，利用配对单元平均增长率的性质，获得了这两个序列的极限性质．随机环境中配对依赖人口数两性分枝过程比较复杂，本文的结论推广了现有的研究成果．     

The vibration and pull-in mechanism of two coupled elastically restrained beams assembly subjected to electrostatic force

ABSTRACT

The novel model of the coupled beam-type electrodes with elastic roots, subjected to the AC and DC voltages is constructed. The exact critical pull-in voltage of the two coupled elastically restrained beams with size effect is presented. The analytical method of the general system subjected to the AC and DC voltages simultaneously is presented. The characteristic mechanism of coupled vibration is investigated.     

Effects of Ti,Y, and Hf additions on the thermal properties of ZrB2

Reactive hot pressing was utilized to synthesize and densify four ZrB₂ ceramics with impurity contents low enough to avoid obscuring the effects of dopants on thermal properties. Nominally pure ZrB₂ had a thermal conductivity of 141 ± 3 W/m K at 25 °C. Additions of 3 at% of Ti, Y, or Hf decreased the thermal conductivity by 20 %, 30 %, and 40 %, respectively. The thermal conductivity of (Zr,Hf)B₂ was similar to ZrB₂ synthesized from commercial powders containing the natural abundance of Hf as an impurity. This is the first study to demonstrate that Ti and Y additions decrease the thermal conductivity of ZrB₂ ceramics and report intrinsic values for thermal conductivity and electrical resistivity of ZrB₂ containing transition metal additions. Previous studies were unable to detect these effects because the natural abundance of Hf present masked the effects of these additions.